Kuku umum
Kuku umum kuat tur kaku, sarta shanks maranéhanana boga diaméter leuwih badag batan paku lianna.Duanana paku umum sareng kotak gaduh notches caket sirah paku.Notches ieu ngamungkinkeun kuku nahan hadé.Sababaraha bakal gaduh ulir kawas screw di luhureun sirah paku pikeun kakuatan nyekel tambahan.Kuku kotak boga shanks thinner ti paku biasa na teu kudu dipaké pikeun konstruksi framing.Nalika nailing dua papan babarengan, duanana jenis paku kudu sagemblengna nembus hiji sapotong kai sarta kudu nembus sapotong séjén kalawan satengah panjangna.Ieu ensures paku cukup kuat pikeun pakasaban.
Paku umum cocog pikeun kai teuas tur lemes, potongan awi, atawa plastik, foundry témbok, repairing jati, bungkusan jsb.Widely dipaké dina konstruksi, hiasan, sarta renovasi.Kuku umum bisa digosok, elektro galvanized jeung panas dipped galvanized rengse.
Bungkusan:
1. 25KG / CTN
2.Boxes jero lajeng karton luar
kantong 3.Plastic jero lajeng karton luar
4. bisi kai
5.Any packing séjén salaku per requrimen Anjeun
Panjelasan Produk
spésifikasi:
1) Bahan: Q195, Q215 rod kawat salaku-kualitas luhur low-karbon-baja
2) Finish: kuku umum digosok, kuku umum galvanized listrik, kuku umum galvanized panas dipped
3) Sirah: sirah umum, sirah countersunk, sirah leungit, sirah countersunk datar checkerred
4) Batang: polos, buleud
5) Point: titik inten, titik buleud
6) Nangtung: BS EN 10230-1: 2000, normal
7）Fitur: sirah datar, rond, lemes, anti korosif
8）Pamakéan: konstruksi, casting keusik, repairing jati, kasus kai ect.
| Ukuran | Panjangna di. | Gage No. | Diaméter sirah asup. | Kira-kira.Jumlah Per IB |
| 2d | 1 | 15 | 11/64 | 847 |
| 3d | 1 1/4 | 14 | 13/64 | 543 |
| 4d | 1 1/2 | 12 1/2 | 1/4 | 294 |
| 5d | 1 3/4 | 12 1/2 | 1/4 | 254 |
| 6d | 2 | 11 1/2 | 17/64 | 167 |
| 7d | 2 1/4 | 11 1/2 | 17/64 | 150 |
| 8d | 2 1/2 | 10 1/4 | 9/32 | 101 |
| 9d | 2 3/4 | 10 1/4 | 9/32 | 92 |
| 10d | 3 | 9 | 5/16 | 66 |
| 12 d | 3 1/4 | 9 | 5/16 | 61 |
| 16 d | 3 1/2 | 8 | 11/32 | 47 |
| 20 d | 4 | 6 | 13/32 | 29 |
| 30d | 4 1/2 | 5 | 7/16 | 22 |
| 40d | 5 | 4 | 15/32 | 17 |
| 50d | 5 1/2 | 3 | 1/2 | 13 |
| 60d | 6 | 2 | 17/32 | 10 |
| Panjangna mangrupikeun titik ka handapeun sirah. | ||||
| ength | Gauge | |
| (Inci) | (mm) | (BWG) |
| 1/2 | 12.700 | 20/19/18 |
| 5/8 | 15.875 | 19/18/17 |
| 3/4 | 19.050 | 19/18/17 |
| 7/8 | 22.225 | 18/17 |
| 1 | 25.400 | 17/16/15/14 |
| 1-1/4 | 31.749 | 16/15/14 |
| 1-1/2 | 38.099 | 15/14/13 |
| 1-3/4 | 44.440 | 14/13 |
| 2 | 50.800 | 14/13/12/11/10 |
| 2-1/2 | 63.499 | 13/12/11/10 |
| 3 | 76.200 | 12/11/10/9/8 |
| 3-1/2 | 88.900 | 11/10/9/8/7 |
| 4 | 101.600 | 9/8/7/6/5 |
| 4-1/2 | 114.300 | 7/6/5 |
| 5 | 127.000 | 6/5/4 |
| 6 | 152.400 | 6/5/4 |
